'HOOT' NOISE DURING VEHICLE HIGHWAY OPERATION

MODELS: 1988-89 K1,K2,K3

Some 1988-1989 K trucks may exhibit a "hoot" noise during vehicle highway operation. This condition is caused by wind rushing over the access holes for the stabilizer bar link in the lower control arm.

SERVICE ACTION

Install plug in the link access hole in the lower control arms. (2 per vehicle.)

SERVICE PARTS INFORMATION

P/N 15611475 Plug-lower control arm hole

Parts are currently available from GMSPO.

For vehicles repaired under warranty, use: Labor Operation: T7845 Labor Time: .2 Hr.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.