GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC K Pickup - 4WD 🢒 Engine 🢒 Engine Mechanical - 6.5L 🢒 Oil Pump Drive Installation

    Object Number: 59768 Size: SH
  1. Install the new gasket to the oil pump drive.
  2. Install the oil pump drive to the engine.
    3. • Index the drive with the camshaft gear and the oil pump drive shaft.
    • Make sure the drive seats fully.

    Object Number: 59765 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the clamp and the bolt.

    4. Tighten
    Tighten the bolt to 42 N·m (31 lb ft).