Tools Required

J 43276 Clutch Pilot Bearing Remover

Caution: Wear safety glasses in order to avoid eye damage.

Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

Using theJ 43276 Clutch Pilot Bearing Remover, remove the clutch pilot bearing. Discard (do not reuse) the clutch pilot bearing.

1. Install the J 43276-1 tool body into the clutch pilot bearing.
2. Using a wrench, secure the J 43276-1 tool body.
3. Insert the J 43276-2 forcing screw into the J 43276-1 tool body.
4. Using a wrench, rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.