Fan Clutch Replacement 7.4L

1. Remove the upper fan shroud. Refer to Fan Shroud Replacement .

•	Locate the yellow dot on the fan clutch hub.

•	Mark the coolant pump pulley adjacent to the yellow dot.

2. Remove the nuts from the fan clutch hub.
3. Remove the fan and fan clutch from the coolant pump pulley.
4. Remove the bolts.
5. Remove the radiator fan from the fan clutch.
6. Inspect the mating surfaces of the coolant pump hub and the fan clutch hub for smoothness. Rework as needed in order to eliminate any burrs or other imperfections.

Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

1. Install the radiator fan to the fan clutch.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts.

Tighten
Tighten the bolts to 24 N·m (18 lb ft).

3. Install the fan and clutch assembly to the coolant pump pulley. Align the yellow marks on the coolant pump pulley and the fan clutch hub.
4. Install the nuts.

Tighten
Tighten the nuts to 24 N·m (18 lb ft).

5. Install the upper fan shroud. Refer to Fan Shroud Replacement .

Fan Clutch Replacement 5.0L, 5.7L and 6.5L

Tools Required

Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

1. Remove the upper fan shroud. Refer to Fan Shroud Replacement .
2. Remove the accessory drive belt. Refer to the appropriate procedure:

•	Drive Belt Replacement

•	Drive Belt Replacement

•	Drive Belt Replacement




3. Use the J 41240 in order to remove the fan and the clutch on the 5.0L and 5.7L .

Use the Spanner of the J 41240 in order to hold the Pulley.

4. Use the J 41240-5A in order to remove the fan and the clutch on the 6.5L.

Use the Spanner of the J 41240 in order to hold the Pulley.




5. Remove the fan blade assembly from the clutch.

Tools Required

Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the fan blade to the clutch.

Tighten
Tighten the bolts to 23 N·m (17 lb ft).




2. Use the J 41240 in order to tighten the fan and clutch on the 5.0L and 5.7L.

Use the Spanner of the J 41240 in order to hold the pulley.

3. Use the J 41240-5A and the J 41240 in order to tighten the fan and clutch on the 6.5L.

Use the Spanner of the J 41240 in order to hold the pulley.

Tighten

•	Tighten the 5.0L and 5.7L fan clutch nut to 56 N·m (41 lb ft).

•	Tighten the 6.5L fan clutch nut to 59 N·m (44 lb ft).

4. Install the accessory drive belt. Refer to the appropriate procedure:

•	Drive Belt Replacement

•	Drive Belt Replacement

•	Drive Belt Replacement

5. Install the upper fan shroud. Refer to Fan Shroud Replacement .