Tools Required

J 24086-C Piston Pin Remover and Installer

1. Remove the piston rings from the pistons.



2. Press the pin from the connecting rod by using J 24086-C .

The piston pin has an interference fit into the connecting rod and is full floating in the piston.





Notice: Do not shim, scrape, or file bearing inserts. Do not touch the bearing surface of the insert with bare fingers. Skin oil and acids will etch the bearing surface.

3. If the bearings will be reused, place the bearings in a rack in order to ensure reinstallation with the original connecting rod and the cap.