• | Locate the yellow dot on the fan clutch hub. |
• | Mark the coolant pump pulley adjacent to the yellow dot. |
Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 24 N·m (18 lb ft).
Tighten
Tighten the nuts to 24 N·m (18 lb ft).
• | J 41240 Fan Clutch Wrench and Spanner |
• | J 41240-5A Fan Clutch Wrench |
Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
Use the Spanner of the J 41240 in order to hold the Pulley.
Use the Spanner of the J 41240 in order to hold the Pulley.
• | J 41240 Fan Clutch Wrench and Spanner |
• | J 41240-5A Fan Clutch Wrench |
Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 23 N·m (17 lb ft).
Use the Spanner of the J 41240 in order to hold the pulley.
Use the Spanner of the J 41240 in order to hold the pulley.
Tighten
• | Tighten the 5.0L and 5.7L fan clutch nut to 56 N·m (41 lb ft). |
• | Tighten the 6.5L fan clutch nut to 59 N·m (44 lb ft). |