Generator Brace Replacement CS- 144

1. Remove the generator brace retainer bolts from the generator bracket.



2. Remove the generator brace retainer from the generator bracket.
3. Remove the generator brace.

1. Install the generator brace.
2. Install the generator brace to the generator bracket.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the generator brace retaining bolts to the generator brace and bracket.

Tighten
Tighten the generator brace retaining bolts to 50 N·m (37 lb ft).