GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC K Pickup - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 Transfer Case Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transfer case shield. Refer to Shield Replacement .
  3. Remove the front propeller shaft. Refer to Front Propeller Shaft Replacement in Propeller Shaft.
  4. Remove the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement or Three-Piece Propeller Shaft Replacement in Propeller Shaft.

    5. Object Number: 175384 Size: SH
  5. Remove the vent hose from the transfer case. Refer to Vent Hose.
  6. Disconnect the vehicle speed sensor electrical connector.
  7. Disconnect the wiring harness from the transfer case.

    8. Object Number: 165643 Size: SH
  8. Remove the transfer case motor/encoder.

    9. Support the transfer case with a jack.


    Object Number: 175410 Size: SH
  9. Remove the bolts securing the transfer case to the transmission adapter.
  10. Remove the gasket.

    11. Object Number: 2214 Size: SH
  11. Discard the gasket.

Installation Procedure

    Object Number: 2214 Size: SH
  1. Install a new gasket to the transmission. Use a gasket sealer in order to hold the gasket in place.

    2. Object Number: 2213 Size: SH
  2. Install the transfer case to the transmission adapter.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2217 Size: SH
  3. Install the bolts that secure the transfer case to the transmission adapter.

    4. Tighten
    Tighten the bolts to 45 N·m (33 lb ft).


    Object Number: 165643 Size: SH
  4. Install the transfer case motor/encoder.
  5. Remove the jack from the transfer case.
  6. Install the electrical connectors and the wiring harness to the transfer case with the new straps.
  7. Install the vent hose to the transfer case.
  8. Install the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement or Three-Piece Propeller Shaft Replacement in Propeller Shaft.
  9. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement in Propeller Shaft.
  10. Install the transfer case shield. Refer to Shield Replacement .
  11. Lower the vehicle.