Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Column Shift
- Remove the upper and lower
trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Pop the wire harness assembly (4) out of the wire harness
strap (5).
- Remove the wire harness straps (3) from the wire harness
assembly (4).
- Remove the wire harness strap (2) from the steering column
support assembly (1).
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly out of the bulk head
connector (1).
- Remove the 2 pan
head tapping screws (1).
- Remove the turn signal and multifunction switch assembly (2).
Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Floor Shift
- Remove the upper and lower
trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Pop the wire harness assembly (4) out of the wire harness
strap (5).
- Remove the wire harness straps (3) from the wire harness
assembly (4).
- Remove the wire harness strap (2) from the steering column
support assembly (1).
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly off of the bulk head
connector (1).
- Remove the 2 pan
head tapping screws (1).
- Remove the turn signal and multifunction switch assembly (2).