Did you perform the DRL System Check?

--

Go to Step 2

Go to Daytime Running Lights (DRL) System Check

1. Turn the ignition switch to the LOCK position.
2. Disconnect the instrument cluster connector.
3. Connect a J 35616-200 test lamp from the instrument cluster connector, cavity 4, to B+.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

1. Turn the ignition switch to the RUN position.
2. Connect a J 35616-200 test lamp from the instrument cluster connector, cavity 17, to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

Repair the open in CKT 150 (BLK) between the instrument cluster and splice S204.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--

Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--

Repair open in the CKT 592 (LT GRN/BLK) between the instrument cluster and daytime running lamps (DRL) module.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--