DEFINITION: Use this diagnostic in order to diagnose the endgate identification lamps only if the rear tailights are operative.

Did you perform the Exterior Lamps System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect connector C408.
2. Place the headlamp switch in the Park Lamps position.
3. Connect a J 35616-200 test lamp between connector C408, cavity A and ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 5

Connect a J 35616-200 test lamp across cavities A and B of connector C408.

Does the test lamp light?

--

Go to Step 4

--

Replace the endgate identification lamp assembly.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 9 (BRN) between the endgate identification lamps and splice S413.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 150 (BLK) between the endgate identification lamps and splice S411.

Is the repair complete?

--

Go to Exterior Lights System Check

--