The message received from remote control door lock transmitter is programmed to the BCM, but did not pass the encryption security test.

The remote control door lock transmitter has been in the synchronization mode or program mode out of range of the BCM. This malfunction could also be caused if the message has an error due to noise from the surrounding environment or the remote control door lock transmitter is defective.

No remote function capability.

Fault is corrected and DTC memory clearing procedure is completed.

A possible cause is the remote control door lock transmitter was synchronized out of range of the BCM. To synchronize the transmitter to the BCM, press the lock and unlock buttons on the transmitter at the same time for 5 seconds, this will synchronize the BCM with the remote control door lock transmitter.