Did you perform the Instrument Cluster System Check?

--

Go to Step 2

Go to Instrument Cluster System Check

1. Remove the audio alarm module from the convenience center.
2. Connect a fused jumper from terminal K3 of the audio alarm module to B+.

Did the fasten safety belt indicator lamp light?

--

Go to Step 3

Go to Step 4

Replace the audio alarm module.

Is the repair complete?

--

Go to Instrument Cluster System Check

--

1. Remove the instrument cluster.
2. Connect a fused jumper from cavity K3 of the convenience center to ground.
3. Connect a J 35616-200 test lamp from cavity 30 of the instrument cluster connector to ground.

Did the test lamp light?

--

Go to Step 5

Go to Step 6

Locate and repair the open in CKT 234 (YEL) between the convenience center and the instrument cluster. Refer to Wiring Repairs in wiring.

Is the repair complete?

--

Go to Instrument Cluster System Check

--

Connect a J 35616-200 test lamp from the instrument cluster connector to B+.

Does the test lamp light?

--

Go to Step 8

Go to Step 7

Locate and repair open in CKT 451 (BLK/WHT) between the instrument cluster connector and G103 or G104. Refer to Wiring Repairs in wiring.

Is the repair complete?

--

Go to Instrument Cluster System Check

--

1. Inspect instrument cluster printed circuity board for damage.
2. Repair or replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Instrument Cluster System Check

--