Key-in-Ignition Chime Inoperative Base
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Audible Warnings Diagnostic System Check performed? | -- | Go to Step 2 | |
2 |
Is there continuity? | -- | Go to Step 3 | Go to Step 4 |
3 |
Is there continuity? | -- | Go to Step 5 | Go to Step 6 |
4 | Locate and repair the open in CKT 80 (LT GRN) between the convenience center and connector C266. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
5 |
Is there continuity? | -- | Go to Step 7 | Go to Step 8 |
6 | Replace the key-in warning buzzer switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle . Is the repair complete? | -- | -- | |
7 |
Is there continuity? | -- | Go to Step 9 | Go to Step 10 |
8 | Locate and repair the open in CKT 159 (TAN) between connector C266 and the left front door jamb switch. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
9 | Connect a J 39200 DMM from the left front door jamb switch connector cavity B and ground G200. Is there continuity? | -- | Go to Step 11 | Go to Step 12 |
10 | Replace the left front door jamb switch. Refer to Door Jamb Switch Replacement in doors. Is the repair complete? | -- | -- | |
11 | Replace the audio alarm module. Is the repair complete? | -- | -- | |
12 | Locate and repair the open in CKT 150 (BLK) between the left front door jamb switch and ground G200. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- |
Key-in-Ignition Chime Inoperative Luxury
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Audible Warnings Diagnostic System Check performed? | -- | Go to Step 2 | |
2 |
Is there continuity? | -- | Go to Step 3 | Go to Step 9 |
3 |
Is there continuity? | -- | Go to Step 4 | Go to Step 14 |
4 |
Is there continuity? | -- | Go to Step 6 | Go to Step 5 |
5 | Locate and repair the open in CKT 159 (TAN) between the BCM connector C1 and C304. Is the repair complete? | -- | -- | |
6 | Connect a J 39200 DMM between cavity C14 of BCM connector C1 and cavity E9 of C304. Is there continuity? | -- | Go to Step 8 | Go to Step 7 |
7 | Locate and repair open in CKT 80 (LT GRN) between BCM connector C1 and C304. Is the repair complete? | -- | -- | |
8 | Replace the body control module (BCM). Refer to Body Control Module Replacement . in body control systems. Is the repair complete? | -- | -- | |
9 |
Is there continuity? | -- | Go to Step 11 | Go to Step 10 |
10 | Locate and repair open in CKT 150 (BLK) between C266 and G200. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
11 | Connect a J 39200 DMM between cavity E9 of C304 and cavity B3 of C266. Is there continuity? | -- | Go to Step 13 | Go to Step 12 |
12 | Locate and repair open in CKT 80 (LT GRN) between C304 and C266. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
13 | Replace the key-in warning buzzer switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle . Is the repair complete? | -- | -- | |
14 |
Is there continuity? | -- | Go to Step 16 | Go to Step 15 |
15 | Locate and repair open in CKT 150 (BLK) between the LF door jamb switch and G200. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
16 | Connect a J 39200 DMM between C304 cavity F9 and the LF door jamb switch connector cavity C. Is there continuity? | -- | Go to Step 18 | Go to Step 17 |
17 | Locate and repair open in CKT 159 (TAN) between C304 and LF door jamb switch. Refer to Wiring Repairs in wiring. Is the repair complete? | -- | -- | |
18 | Replace the LF door jamb switch. Refer to Door Jamb Switch Replacement in doors. Is the repair complete? | -- | -- |
