Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: This diagnostic procedure should only be used if the cargo door unlocks with the door lock switches and is inoperative with the keyless entry transmitter. | ||||
1 | Was the Keyless Entry System Check performed? | -- | Go to Step 2 | |
2 |
Is there battery voltage? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |
4 | Repair open in CKT 540 (ORN) between the remote control door lock receiver and S255. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: This diagnostic procedure should only be used if the cargo doors unlocks with the door lock switches and is inoperative with the keyless entry transmitter. | ||||
1 | Was the Keyless Entry System Check performed? | -- | Go to Step 2 | |
2 |
Is there battery voltage? | -- | Go to Step 3 | Go to Step 6 |
3 | Connect a DMM, set on ohms, cavity 2 and ground. Is there continuity? | -- | Go to Step 4 | Go to Step 7 |
4 |
Did the test lamp light? | -- | Go to Step 5 | Go to Step 8 |
5 | Replace the cargo door lock relay. Is the repair complete? | -- | -- | |
6 | Repair open in CKT 540 (ORN) between the cargo door lock relay and the convenience center. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
7 | Repair open in CKT 150 (BLK) between the cargo door lock relay and the convenience center. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 |
Is th erepair complete? | -- | -- |