GM Service Manual Online
For 1990-2009 cars only

Jack and Tool Stowage Replacement Pickup and Crew Cab

Removal Procedure


    Object Number: 276952  Size: SH
  1. Remove the nut retaining the jack and tool stowage container cover.

  2. Object Number: 276956  Size: SH
  3. Remove the jack and tools from the stowage container.

  4. Object Number: 276954  Size: SH
  5. Remove the tool stowage container from the bracket.

Installation Procedure


    Object Number: 276954  Size: SH
  1. Install the tool stowage container to the bracket.

  2. Object Number: 276956  Size: SH
  3. Install the jack and tools into the stowage container.

  4. Object Number: 276952  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the jack and tool stowage tray cover and nut.
  6. Tighten
    Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement Extended Cab Pickup

Removal Procedure


    Object Number: 276952  Size: SH
  1. Remove the nut retaining the jack and tool stowage container cover.

  2. Object Number: 276958  Size: SH
  3. Remove the jack and tools from the stowage container.

  4. Object Number: 276957  Size: SH
  5. Remove the tool stowage container from the bracket.

Installation Procedure


    Object Number: 276957  Size: SH
  1. Install the tool stowage container to the bracket.

  2. Object Number: 276958  Size: SH
  3. Install the jack and tools into the stowage container.

  4. Object Number: 276952  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the jack and tool stowage tray cover and nut.
  6. Tighten
    Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement 2-Door Utility

Removal Procedure


    Object Number: 276969  Size: SH
  1. Remove the nut retaining the jack and tool stowage tray cover.

  2. Object Number: 276974  Size: SH
  3. Remove the jack and tools from the stowage tray.

  4. Object Number: 276971  Size: SH
  5. Remove the jack and tool stowage tray.

Installation Procedure


    Object Number: 276971  Size: SH
  1. Install the jack and tool stowage tray.

  2. Object Number: 276974  Size: SH
  3. Install the jack and tools into the stowage tray.

  4. Object Number: 276969  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the jack and tool stowage tray cover and nut.
  6. Tighten
    Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement 4-Door Utility

Removal Procedure


    Object Number: 276977  Size: SH
  1. Remove the nut retaining the jack and tool stowage tray cover.

  2. Object Number: 276979  Size: SH
  3. Remove the jack and tools from the stowage tray.
  4. Remove the jack and tool stowage tray.

Installation Procedure


    Object Number: 276979  Size: SH
  1. Install the jack and tool stowage tray.
  2. Install the jack and tools into the stowage tray.

  3. Object Number: 276977  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the jack and tool stowage tray cover and nut.
  5. Tighten
    Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement Suburban

Removal Procedure


    Object Number: 276964  Size: SH
  1. Remove the nut retaining the jack and tool stowage tray.
  2. Remove the jack and tools from the stowage tray.

  3. Object Number: 276961  Size: SH
  4. Remove the stud from the tool stowage tray.

Installation Procedure


    Object Number: 276961  Size: SH
  1. Install the stud to the tool stowage tray.

  2. Object Number: 276964  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the jack and tools into the stowage tray.
  4. Install the jack and tool stowage tray nut.
  5. Tighten
    Tighten the nut to retain the jack and tool stowage tray to 5 N·m (44 lb in).