Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Control Module (BCM) (Luxury) | In the center floor console | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Convenience Center | Under the left side of the IP, on the bulkhead | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
IP Fuse Block | To the left of the IP, near the left front door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Liftgate Release Motor | In the right center of the liftgate | ||
Liftgate Release Relay | Right center of liftgate | ||
Liftgate Release Switch | In the center of the IP, to the left of the radio | ||
C100 | Part of the engine harness to IP harness, in the left rear side of the engine compartment, at the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Behind the right side of the IP, near the heater motor, in foam wrap | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C210 | At the convenience center | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C298 | Behind the left side of the IP, near the convenience center | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C301 | At the left front kick panel | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C302 | At the LF kick panel | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C305 (Luxury) | Cross Body harness, Inline to Floor Console harness | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C314 (Suburban/Utility) | On the left D-pillar behind the trim cover | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C450 (Suburban/Utility) | Center rear of the vehicle under the floor between P409 and P410 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G105 (Gas) | On the right front side of the engine block | Power and Grounding Component Views in Wiring Systems | -- |
G105 (Diesel) | Right Rear of the cylinder head, cylinder #7 intake bolt | Power and Grounding Component Views in Wiring Systems | -- |
P101 | In the right rear side of the engine compartment, at the bulkhead | Harness Routing Views in Wiring Systems | -- |
P409 | Center rear of body | Harness Routing Views in Wiring Systems | -- |
P410 | Center bottom of endgate | Harness Routing Views in Wiring Systems | -- |
S106 (7.4L) | Engine harness, approx. 7 cm (2.5 in) from the EGR valve breakout, toward the fuel injector breakout | -- | -- |
S107 (5.0L, 5.7L) | Engine harness, approx. 20 cm (8 in) from the EGR valve breakout, toward the taillamp harness breakout | -- | -- |
S107 (6.5L, HD) | Engine harness, approx. 40 cm (15 in) from the EBCM breakout, toward the transmission harness breakout | -- | -- |
S107 (7.4L) | Engine harness, approx. 18 cm (7 in) from the EBCM breakout, toward the EGR harness breakout | -- | -- |
S147 (Gas) | Engine harness, approx. 5 cm (2 in) from the EGR valve breakout, toward the taillamp harness breakout | -- | -- |
S147 (Diesel) | Engine harness, approx. 4 cm (1.5 in) from the starter motor solenoid breakout | -- | -- |
S162 (5.0L, 5.7L) | Engine harness, approx. 17 cm (6.5 in) from the starter solenoid breakout, toward the LH oxygen sensor breakout | -- | -- |
S162 (7.4L) | Engine harness, approx. 15 cm (6 in) from the RH bank oxygen sensor breakout, toward the starter solenoid breakout | -- | -- |
S256 (Pickup/Extended Cab) | Crossbody harnness, approx. 12 cm (4.5 in) from C210 breakout, toward the LH seat harness breakout | -- | -- |
S256 (Utility/Suburban) | Crossbody harnness, approx. 11 cm (4 in) from C210 breakout, toward the LH seat harness breakout | -- | -- |
S256 (Crew Cab) | Crossbody harnness, approx. 1 cm (0.5 in) before the door lock relay breakout, toward the LH seat harness breakout | -- | -- |
S264 | IP harness, approx. 4 cm (1.5 in) from the instrument cluster breakout, toward radio connectors breakout | -- | -- |
S265 (Utility/Suburban) | Crossbody harness, approx. 8 cm (3 in) from the LF door breakout | -- | -- |
S404 (4-Door Utility) | Front-to-rear body harness, into the convenience center harness breakout, approx. 7 cm (2.5 in) after the door lock relay harness breakout | -- | -- |
S410 (2-Door Utility) | Front-to-rear body harness, into the convenience center harness breakout, approx. 37 cm (14.5 in) from the RR door jamb switch breakout, toward the RH door speaker breakout | -- | -- |
S410 (4-Door Utility/Suburban) | Front-to-rear body harness, approx. 12 cm (4.5 in) from the RR door speaker breakout, toward the RR door jamb breakout | -- | -- |
S434 (2-Door Utility) | Front-to-rear body harness, approx. 7 cm (2.5 in) from the front dome lamp breakout, toward the crossbody harness breakout | -- | -- |
S434 (4-Door Utility/Suburban) | Front-to-rear body harness, approx. 20 cm (8 in) before the rear dome lamp harness breakout, towards the HVAC module | -- | -- |
S434 (4-Door Utility/Suburban w/o C69) | Front-to-rear body harness, approx. 25 cm (10 in) into the crossbody harness breakout, towards C301 | -- | -- |
