The crankcase ventilation system is used on diesel engines and is designed to maintain a slightly negative (vacuum) crankcase pressure across the speed range. The system consists of a crankcase depression regulator (CDR) valve, located on the right valve cover and attaching vent hose/pipes to the engine inlet system. The CDR valve is used only to regulate the crankcase pressure between +.249-.996 kPa (1-4 in. of water) depression over the engine speed range. The CDR valve is NOT an oil separator or a crankcase effluent flow regulator. Hence, the CDR valve DOES NOT prevent oil droplets/mist from entering the intake system, nor does the CDR valve affect the engine oil consumption.

The intake manifold vacuum acts against a spring loaded diaphragm in order to control the flow of the crankcase gases. Higher intake vacuum or high intake restriction (e.g., plugged air filter) levels pull the diaphragm closer to the top of the outlet tube. This prevents the vacuum level from getting too high in the crankcase. As the intake vacuum decreases, the spring pushes the diaphragm away from the top of the outlet tube, preventing the crankcase pressure from going positive.