GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 GMC K Pickup - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - BW 4401 (Two Speed Manual) 🢒 Shield Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 175368 Size: SH
  2. Remove the four bolts and the nuts securing the transfer case shield to the frame.
  3. Remove the shield from the frame.

Installation Procedure

    Object Number: 175368 Size: SH
  1. Install the shield to the frame.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the four bolts and the nuts securing the transfer case shield to the frame.

    3. Tighten
    Tighten the bolts and the nuts to 35 N·m (26 lb ft).

  3. Lower the vehicle.