Was the System Check Performed?

--

Go to Step 2

Go to Selectable Ride System Check

1. Remove the selectable ride switch from the instrument panel. Refer to Electronic Suspension Switch Replacement .
2. Turn the ignition to the ON position.
3. Ensure the selectable ride switch is in the ON position (depressed).
4. Connect a test lamp (back probe) from terminal C (TAN/WHT) to ground.

Does the test lamp light?

--

Go to Step 6

Go to Step 3

Connect a test lamp (back probe) terminal F (PNK) to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 4

Locate and repair the open in CKT 739 (PNK) between the switch and mid bussed electrical center (MBEC).

Is the repair complete?

--

System OK

--

Replace the selectable ride switch. Refer to Electronic Suspension Switch Replacement .

Is the repair complete?

--

System OK

--

1. Turn the ignition OFF.
2. Disconnect the selectable ride switch.
3. Connect a self-powered test lamp from terminal B (BLK) to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 7

Locate and repair the open in CKT 1850 (BLK) to ground.

Is the repair complete?

--

System OK

--