GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC K Sierra - 4WD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Cable Guide Replacement

Removal Procedure
  1. Release the parking brake
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    3. Object Number: 363843 Size: SH
  3. Remove the park brake cable guide bolt from the frame.
  4. Remove the park brake cable guide.
  5. Remove the park brake guide from the park brake cable.

Installation Procedure

    Object Number: 363843 Size: SH
  1. Install the park brake cable guide to the park brake cable.
  2. Install the park brake cable guide.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the park brake cable guide bolt to the frame.

    4. Tighten
    Tighten the bolt to 12 N·m (106 lb in).

  4. Remove the safety stands.
  5. Lower the vehicle.