The power steering gear inlet (pressure) hose is grounding out.

Inspect the power steering gear inlet (pressure) hose. Determine if the following items are correct:

Refer to Power Steering Pump Replacement .

The rack bearing adjust is loose.

Tighten the rack bearing adjust to specification.

Refer to Steering Gear Replacement .

The steering gear is loose.

Tighten the steering gear mounting bolts to specification.

Refer to Steering Gear Replacement .

The tie rod ends are loose.

1. Inspect the tie rod ends.
2. Replace the tie rod ends as needed.

Refer to Steering Gear Replacement .

The intermediate shaft universal joints are loose.

Refer to Intermediate Steering Shaft Replacement in Steering Wheel and Column-Tilt.