GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC K Sierra - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Rear Bench Seat Replacement

Removal Procedure
  1. Pull the seat belt buckles through the seat cushion and seat back.
  2. Fold the seat up.

    3. Object Number: 363716 Size: SH
  3. Remove the seat retaining bolts (1).
  4. Lift the rear seat from the retaining hooks.
  5. Remove the seat from the vehicle.

Installation Procedure
  1. Place the seat back clips on the retaining hooks.
  2. Fold the seat down.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 363716 Size: SH
  3. Install the seat retaining bolts (1).

    4. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  4. Pull the seat belt buckles through the seat cushion and seat back.