Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Panel Cluster System Check? | -- | ||
2 |
Does the scan tool show any DTCs? | -- | Go to Diagnostic System Check - Body Control System in Body Control System | |
3 | Turn the park lamps ON. Do the park lamps function properly? | -- | Go to Park Lamps Inoperative | |
4 | Remove and inspect the ILLUM fuse. Is the fuse open? | -- | ||
5 |
Is the repair complete? | -- | System OK | -- |
6 |
Does the test lamp light? | -- | ||
7 | Connect a test lamp (back probe) from terminal K of the headlamp and panel dimmer switch to ground. Does the test lamp light? | -- | ||
8 | Replace the headlamp and panel dimmer switch. Refer to Headlamp Switch Replacement Is the repair complete? | -- | System OK | -- |
9 | Locate and repair the open in CKT 44 (DK GRN) between the switch and the fuse. Is the repair complete? | -- | System OK | -- |
10 |
Does the test lamp light? | -- | ||
11 | Locate and repair the open in CKT 8 (GRY) between the fuse and the cluster. Is the repair complete? | -- | System OK | -- |
12 | Connect a self powered test lamp from terminal A6 to ground. Does the test lamp light? | -- | ||
13 | Repair or replace the instrument cluster, lights as needed. Refer to Instrument Cluster Bulb Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | System OK | -- |
14 | Locate and repair CKT 1850 (BLK) for an open to ground. Is the repair complete? | -- | System OK | -- |
