The mounting provision for the trailer electric brake module/controller is located directly beneath the steering column on the steel lower tie bar that runs the full length of the instrument panel. The mounting provision consists of 2 screw holes and indentations, allowing the installation of 2 U-nuts and screws to hold the trailer brake module/controller in position.

For electrical harness connections of the trailer electric brake module/controller, refer to Exterior Lights Circuit Description in Lighting Systems.

Figure 1:	Instrument Cluster - Manual Transmission
Figure 2:	Instrument Cluster - Automatic Transmission
Figure 3:	Mounting Provision For The Trailer Electric Brake Module/Controller