Pickup Box Body Side Molding Replacement Standard Box

Remove the moldings from the pickup box body.

Important: Apply the moldings in an environment free of dust and dirt. Dust and dirt could come in contact with the adhesive backing and prevent proper adhesion.




1. Clean the area where the replacement molding is to be mounted. Use a suitable solvent such as flash naphtha or a mixture of 50 percent isopropyl alcohol and 50 percent water.
2. Dry the area thoroughly.
3. Maintain a temperature range of 27-41°C (80-105°F) in the body area. Heat the area if necessary.
4. Maintain a temperature range of 29-32°C (80-90°F) for the molding that is to be mounted. Carefully apply heat to the item if needed.
5. Remove the protective liner.
6. Install the molding to the pickup box body.

Pickup Box Body Side Molding Replacement Step Side Box

Remove the moldings from the pickup box body.

Important: Apply the moldings in an environment free of dust and dirt. Dust and dirt could come in contact with the adhesive backing and prevent proper adhesion.




1. Clean the area where the replacement molding is to be mounted. Use a suitable solvent such as flash naphtha or a mixture of 50 percent isopropyl alcohol and 50 percent water.
2. Dry the area thoroughly.
3. Maintain a temperature range of 27-41°C (80-105°F) in the body area. Heat the area if necessary.
4. Maintain a temperature range of 29-32°C (80-90°F) for the molding that is to be mounted. Carefully apply heat to the item if needed.
5. Remove the protective liner.
6. Install the molding to the pickup box body.