Tools Required

Inside mirror adhesive kit GM P/N 1052369 or equivalent

1. Remove the mirror mounting button from the mirror bracket by loosening the set screw.



2. Mark the outside of the windshield with a crayon in order to identify the prior location of the rear view mirror button.
3. Scrape the inside windshield glass thoroughly with a safety razor or utility knife in order to remove all old adhesive.
4. Scrape the mirror button thoroughly with a safety razor or utility knife in order to remove all old adhesive.
5. Wipe the area clean with a clean cloth saturated with alcohol.

1. Apply a generous amount of activator to the mounting surface of the mirror button.
2. Apply a generous amount of activator to the windshield where the button is to be put.
3. Allow the activator to dry for 5 minutes.

Important: Do not touch the mounting surface of the button or the glass.

4. Apply 1 drop of adhesive to the center of the button.



5. Immediately apply the button to the windshield, ensuring that the button aligns correctly to the marks made on the outside of the windshield.
6. Hold the button firmly for 1 minute.
7. Allow the adhesive to set for 15 minutes.
8. Connect the mirror to the mirror mount button. Refer to Inside Rearview Mirror Replacement .