Roof Console Replacement Full Length

1. Remove the console roof screw.
2. Disconnect the electrical connectors.
3. Remove the console.

1. Install the console to the roof.
2. Connect the electrical connectors.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the console to the roof with the screw.

Tighten
Tighten the overhead console screw to 2 N·m (18 lb in).

Roof Console Replacement Short

1. Remove the console roof screw.
2. Disconnect the electrical connectors.
3. Remove the console.

1. Install the console to the roof.
2. Connect the electrical connectors.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the console roof screw.

Tighten
Tighten the overhead console screw to 2 N·m (18 lb in).