Removal Procedure
- Loosen the clamp (3) on
the air duct (2) at the throttle body.
- Disconnect the MAF/IAT (4) electrical connector.
- Loosen the four fasteners (8) securing the air cleaner housing top cover
(4).
- Lift and rotate the top cover (4) of the air cleaner housing to
gain access to the air filter element.
- Lift out the air filter element (5).
- Inspect the air filter element for dust, dirt, or water. Clean
or replace the air filter element if required.
Installation Procedure
- Install the air filter element (5) into the air cleaner housing.
- Rotate and install the top cover (4) to the air cleaner
housing (6).
- Insert the fasteners (8) to secure the top cover (4).
- Connect the MAF/IAT (4)
electrical connector.
- Tighten the clamp (3) on the air duct (2) at the throttle body.