Removal Procedure
- Remove the console roof screw.
- Disconnect the electrical connectors.
- Remove the console from vehicle.
- Disconnect the electrical connector from the garage door opener.
- Remove the garage door opener retaining screws.
- Remove the garage door opener from the overhead console.
Installation Procedure
- Install the garage door opener to the overhead console.
Notice: Refer to Fastener Notice in the Preface section.
- Install the garage door opener retaining screws.
Tighten
Tighten the retaining screws to 2 N·m (18 lb in).
- Connect the electrical connector to the garage door opener.
- Install the console to the roof.
- Connect the electrical connectors.
- Install the overhead console retaining screw.
Tighten
Tighten the overhead console retaining screw to 2 N·m (18 lb in).