Rear Bumper Fascia Replacement W/O SS

1. Remove the top fascia retainers.
2. Disconnect the license plate lamp harness.
3. Raise and support the vehicle with suitable safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the push-pin retainers from the underside of the fascia.
5. Remove the fascia from the impact bar.

1. Align the locator pin of the fascia to the hole in the impact bar.



2. Press the push-pin retainers into the underside of the fascia.
3. Remove the safety stands, and lower the vehicle.
4. Connect the license plate lamp harness.
5. Install the top fascia retainers.

Rear Bumper Fascia Replacement SS

1. Remove the step pad.
2. Disconnect the license plate lamp harness.
3. Raise and support the vehicle with suitable safety stands. Refer to Lifting and Jacking the Vehicle .
4. Remove the push-pin retainers from the underside of the fascia.
5. Remove the fascia from the impact bar.

1. Align the locator pin of the fascia to the hole in the impact bar.



2. Press the push-pin retainers into the underside of the fascia.
3. Remove the safety stands, and lower the vehicle.
4. Connect the license plate lamp harness.
5. Install the step pad.