TOWING PROCEDURE W/O DISCONNECTING DRIVE SHAFT

THE FOLLOWING INFORMATION IS FOR USE IN THE UNLIKELY EVENT THAT TOWING OF SUBJECT VEHICLES IS REQUIRED. THESE VEHICLES MAY BE TOWED WITHOUT DISCONNECTING THE DRIVESHAFT BY FOLLOWING THE STEPS LISTED BELOW.

1. PLACE SHIFTER SELECTION LEVER IN NEUTRAL POSITION.

ILLUSTRATION

2. WHEN TOWING, THE SPEED MUST NOT EXCEED 30 MPH.

3. TOWING DISTANCE MUST NOT EXCEED 50 MILES.

ILLUSTRATION

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.