For 1990-2009 cars only
Body and Accessories
General Diagnostic Information
- Checking Aftermarket Accessories
- Circuit Protection - Circuit Breakers
- Circuit Protection - Fuses
- Circuit Protection - Fusible Links
- Circuit Testing
- Connector Position Assurance Locks
- Connector Repairs
- Flat Wire Repairs
- General Electrical Diagnosis
- Heated Oxygen Sensor Wiring Repairs
- Inducing Intermittent Fault Conditions
- Measuring Frequency
- Measuring Voltage
- Measuring Voltage Drop
- Probing Electrical Connectors
- Pull to Seat Connectors
- Push to Seat Connectors
- Repairing Connector Terminals
- Repairing Damaged Wire Insulation
- Scan Tool Snapshot Procedure
- SIR/SRS Wiring Repairs
- Splicing Copper Wire Using Splice Clips
- Splicing Copper Wire Using Splice Sleeves
- Splicing Inline Harness Diodes
- Splicing Twisted or Shielded Cable
- Terminal Position Assurance Locks
- Testing for a Short to Voltage
- Testing for Continuity
- Testing for Electrical Intermittents
- Testing for Intermittent Conditions and Poor Connections
- Testing for Short to Ground
- Troubleshooting with a Digital Multimeter
- Troubleshooting with a Test Lamp
- Using Connector Test Adapters
- Using Fused Jumper Wires
- Weather Pack Connectors
- Wiring Repairs
