Tools Required
| • | J 38358-A
Forward Clutch Assembly Remover/Installer |
- Align the direct clutch plates in order to aid in the installation of the forward clutch housing assembly (602).
Important: Following installation of the forward clutch housing assembly (602), the distance between the top of the speed sensor ring and the pump gasket surface should be approximately 98-99 mm (3.85-3.89 in).
- Using the
J 38358-A
, install the forward clutch housing assembly (602).
- Install the overdrive carrier/forward clutch thrust bearing assembly (601) (silver side up) onto the forward clutch housing assembly (602). Retain with
J 36850
or equivalent.
Tools Required
| • | J 38358-A Forward
Clutch Assembly Remover/Installer |
- Align the direct clutch plates in order to aid in the installation of
the forward clutch housing assembly (602).
Important: Following installation of the forward clutch housing assembly (602),
the distance between the top of the speed sensor ring and the pump gasket
surface should be approximately 98-99 mm (3.85-3.89 in).
- Using the J 38358-A
,
install the forward clutch housing assembly (602).
- Install the overdrive carrier/forward clutch thrust bearing assembly
(601) (silver side up) onto the forward clutch housing assembly (602). Retain
with J 36850
or equivalent.
