Tools Required
Notice: You may recondition the original center support assembly
one time only. You must use the new, larger, service bolt with the reconditioned
center support assembly in order to avoid component damage. The service bolt is yellow
in color, and the production bolt is black in color.
Perform one of the following steps:
| • | If the center support assembly has been previously reconditioned, or if the
J 39919-2
fits into the bolt hole, you MUST replace the center support assembly and bolt. |
| • | If the center support has never been previously reconditioned: |
| 1. | Insert the
J 39919-2
into the center support assembly bolt hole. If the
J 39919-2
does NOT fit into the center support bolt hole, you can recondition
the center support assembly for reuse. |
| 2. | Ream the center support assembly bolt hole to the proper dimension using the
J 39919-1
. |
Tools Required
Notice: You may recondition the original center support assembly (640)
one time only by using the tools listed above. You must use the new, larger,
service bolt with the reconditioned center support assembly in order to avoid
component damage. The service bolt is yellow in color, and the production
bolt is black in color.
Perform one of the following steps:
| | Notice: In order to avoid component damage.
|
| • | If the center support assembly has been previously reconditioned, or
if the J 39919-2
fits into
the bolt hole, you MUST replace the center support assembly and bolt. |
| • | If the center support has never been previously reconditioned: |
| - | Insert the J 39919-2
into the center support assembly bolt hole. If the J 39919-2
does NOT fit into the center support
bolt hole, you can recondition the center support assembly for reuse. |
| - | Ream the center support assembly bolt hole to the proper dimension
using the J 39919-1
. |
