Tools Required

J 33049 Camshaft Bearing Service Kit

1. Select the cone (1), the handle (10), the expanding driver (4-8), the washer (2 or 3), and the expander assembly (15) from the J 33049 .
2. Assemble the J 33049 .




Caution: Wear safety glasses in order to avoid eye damage.

Important: A loose camshaft bearing may be caused by an enlarged, out-of-round, or damaged engine block camshaft bearing bore.

Important: Always remove the camshaft inner bearings #2, #3, and #4 first. The camshaft outer bearings #1 and #5 serve as a guide for the J 33049 .

3. Remove the camshaft inner bearings #2, #3, and #4.

3.1.	Insert the J 33049 through the front of the engine block and into the camshaft inner bearing #2.

3.2.	Tighten the J 33049 expander assembly nut until snug.

3.3.	Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.4.	Drive the camshaft inner bearing #2 from the camshaft inner bearing bore #2.

3.5.	Loosen the J 33049 expander assembly nut.

3.6.	Remove the camshaft inner bearing #2 from the J 33049 expander assembly.

3.7.	Insert the J 33049 expander assembly into the camshaft inner bearing #3.

3.8.	Tighten the J 33049 expander assembly nut until snug.

3.9.	Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.10.

Drive the camshaft inner bearing #3 from the camshaft inner bearing bore #3.

3.11.

Loosen the J 33049 expander assembly nut.

3.12.

Remove the camshaft inner bearing #3 from the J 33049 expander assembly.

3.13.

Insert the J 33049 expander assembly into the camshaft inner bearing #4.

3.14.

Tighten the J 33049 expander assembly nut until snug.

3.15.

Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.16.

Drive the camshaft inner bearing #4 from the camshaft inner bearing bore #4.

3.17.

Loosen the J 33049 expander assembly nut.

3.18.

Remove the camshaft inner bearing #4 from the J 33049 expander assembly.

4. Remove the J 33049 from the engine block.



5. Remove the camshaft outer bearings #1 and #5.

5.1.	Insert the J 33049 into the camshaft outer bearing #1.

5.2.	Tighten the J 33049 expander assembly nut until snug.

5.3.	Drive the camshaft outer bearing #1 from the camshaft outer bearing bore #1.

5.4.	Loosen the J 33049 expander assembly nut.

5.5.	Remove the camshaft outer bearing #1 from the J 33049 expander assembly.

5.6.	Remove the J 33049 from the engine block.

5.7.	Insert the J 33049 into the camshaft outer bearing #5.

5.8.	Tighten the J 33049 expander assembly nut until snug.

5.9.	Drive the camshaft outer bearing #5 from the camshaft outer bearing bore #5.

5.10.

Loosen the J 33049 expander assembly nut.

5.11.

Remove the camshaft outer bearing #5 from the J 33049 expander assembly.

6. Remove the J 33049 from the engine block.
7. Discard the camshaft bearings.

Tools Required

J 33049 Camshaft Bearing Service Kit

1. Select the cone (1), the handle (10), the expanding driver (4-8), the washer (2 or 3), and the expander assembly (15) from the J 33049 .
2. Assemble the J 33049 .




Caution: Wear safety glasses in order to avoid eye damage.

Important: 

•	A loose camshaft bearing may be caused by an enlarged, out-of-round, or damaged engine block camshaft bearing bore.

•	Always remove the camshaft inner bearings #2, #3, and #4 first. The camshaft outer bearings #1 and #5 serve as a guide for the J 33049 .

3. Remove the camshaft inner bearings #2, #3, and #4.

3.1.	Insert the J 33049 through the front of the engine block and into the camshaft inner bearing #2.

3.2.	Tighten the J 33049 expander assembly nut until snug.

3.3.	Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.4.	Drive the camshaft inner bearing #2 from the camshaft inner bearing bore #2.

3.5.	Loosen the J 33049 expander assembly nut.

3.6.	Remove the camshaft inner bearing #2 from the J 33049 expander assembly.

3.7.	Insert the J 33049 expander assembly into the camshaft inner bearing #3.

3.8.	Tighten the J 33049 expander assembly nut until snug.

3.9.	Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.10.

Drive the camshaft inner bearing #3 from the camshaft inner bearing bore #3.

3.11.

Loosen the J 33049 expander assembly nut.

3.12.

Remove the camshaft inner bearing #3 from the J 33049 expander assembly.

3.13.

Insert the J 33049 expander assembly into the camshaft inner bearing #4.

3.14.

Tighten the J 33049 expander assembly nut until snug.

3.15.

Push the J 33049 guide cone into the camshaft front bearing in order to align the J 33049 .

3.16.

Drive the camshaft inner bearing #4 from the camshaft inner bearing bore #4.

3.17.

Loosen the J 33049 expander assembly nut.

3.18.

Remove the camshaft inner bearing #4 from the J 33049 expander assembly.

4. Remove the J 33049 from the engine block.



5. Remove the camshaft outer bearings #1 and #5.

5.1.	Insert the J 33049 into the camshaft outer bearing #1.

5.2.	Tighten the J 33049 expander assembly nut until snug.

5.3.	Drive the camshaft outer bearing #1 from the camshaft outer bearing bore #1.

5.4.	Loosen the J 33049 expander assembly nut.

5.5.	Remove the camshaft outer bearing #1 from the J 33049 expander assembly.

5.6.	Remove the J 33049 from the engine block.

5.7.	Insert the J 33049 into the camshaft outer bearing #5.

5.8.	Tighten the J 33049 expander assembly nut until snug.

5.9.	Drive the camshaft outer bearing #5 from the camshaft outer bearing bore #5.

5.10.

Loosen the J 33049 expander assembly nut.

5.11.

Remove the camshaft outer bearing #5 from the J 33049 expander assembly.

6. Remove the J 33049 from the engine block.
7. Discard the camshaft bearings.