Name | Location | Locator View | Connector End View |
---|---|---|---|
Auxiliary Engine Coolant Fan (Diesel) | In front of the radiator | ||
A/C Compressor Refrigerant Pressure Switch (Diesel) | In the A/C compressor high pressure line (body builder installed) | -- | |
Battery Junction Block | On the forward LH side of the bulkhead above P100 | Power and Grounding Component Views in Wiring Systems | -- |
Fan Control Relay (Diesel) | Engine bulkhead relay bracket under the battery junction block | ||
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, in the bulkhead near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G200 | LH interior bulkhead near the relay bracket | -- | -- |
S110 (Diesel) | In the engine harness, approximately 4 cm (2 in) from the breakout for the ABS harness connectors C110 and C111 | -- | -- |
S110 (Gasoline) | In the engine harness, approximately 4 cm (2 in) from the breakout for C200 toward P100 | -- | -- |
S116 (EFI Diesel) | In the engine harness, approximately 55 cm (21 in) from the breakout for C101 | -- | -- |
S116 (MFI Diesel) | In the engine harness, approximately 5 cm (2 in) from the breakout for the cold advance solenoid, engine coolant temperature switch, toward the glowplug controller breakout | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout toward C200 | -- | -- |
Name | Location | Locator View | Connector End View |
---|---|---|---|
A/C Compressor Refrigerant Pressure Switch | In front of the radiator, next to the auxiliary engine coolant fan | ||
Auxiliary Engine Coolant Fan Motor | In front of the radiator | ||
Auxiliary Engine Coolant Fan Temperature Switch (Diesel) | In the thermostat housing crossover, above the engine near the front | -- | |
Battery Junction Block | On the forward LH side of the bulkhead above P100 | Power and Grounding Component Views in Wiring Systems | -- |
Engine Coolant Temperature (ECT) Sensor (Gas) | At the top front of the engine near the thermostat housing | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Engine Coolant Temperature (ECT) Sensor (Diesel) | At the upper RH front of the engine on the RH side of the coolant outlet tube | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Fan Control Relay | On top of the steering column support, behind the steering column | ||
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (Gas) | Mounted on top of the radiator support | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C200 | At the top front of the steering column support near the park brake pull button switch | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G200 | Mounted to the top front of the steering column support plate | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
S101 (Diesel) | In the engine harness, 16 cm (7 in) from the breakout for the auxiliary engine coolant fan motor, toward P100 | -- | -- |
S101 (Gas) | In the engine harness, 39 cm (14 in) from P100 | -- | -- |
S113 (Diesel) | In the engine harness, 9 cm (4 in) from the breakout for the auxiliary engine coolant fan motor, toward P100 | -- | -- |
S128 (Diesel) | In the engine harness, 12 cm (5 in) from the glowplug controller breakout toward the waste gate solenoid breakout | -- | -- |
S150 (Diesel) | In the engine harness, 14 cm (6 in) from the breakout for the battery junction block and P100 | -- | -- |
S150 (Gas) | In the engine harness, 4 cm (2 in) from the breakout for the battery junction block | -- | -- |
S204 | In the IP harness, 26 cm (11 in) from the breakout for connector C200, toward the IP fuse block | -- | -- |
S228 (Diesel) | In the IP side of the engine harness, 28 cm (11 in) from P100 | -- | -- |
S235 (Gas) | In the IP side of the engine harness, 25 cm (10 in) from P100 toward C200 | -- | -- |