GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 GMC P42 Commercial Chassis 🢒 Engine 🢒 Engine Controls - 5.0L and 5.7L 🢒 Accelerator Pedal Replacement

Removal Procedure

    Object Number: 441431 Size: SH
  1. Disconnect the accelerator control cable from the accelerator pedal rod.

    2. Object Number: 235051 Size: SH
  2. Remove the bolts.
  3. Remove the accelerator pedal.

Installation Procedure

Important: Observe the following when installing the accelerator pedal in order to insure the proper operation of the accelerator controls:

   • Ensure that the accelerator controls operate without rubbing, binding, or chafing between closed throttle and wide open throttle position.
   • Inspect the accelerator mounting surface in order to insure that the surface is free of insulation.
   • Position the carpet flat with no wrinkles in the area of the pedal.


    Object Number: 235051 Size: SH
  1. Install the accelerator pedal and the bolts.

    2. Object Number: 441431 Size: SH
  2. Install the accelerator control cable to the accelerator pedal rod.