Engine Shutdown Solenoid Replacement MFI

1. Remove the engine cover (refer to Engine Cover removal).
2. Remove the air cleaner assembly.
3. Remover the governor cover (refer to Governor Cover Seal Replacement).
4. Remove the terminal contact nuts.
5. Remove the solenoid.

1. Install the solenoid into the governor cover and making sure the linkage is free.
2. Install the washers and terminal contact nuts on the studs.

Tighten
Tighten the contact nuts to 1 N·m (9 Ibs. in.).

Important: Check the solenoid operation prior to installing the pump cover by using a 12 volt power source.

3. Install the governor cover (refer to Governor Cover Installation).
4. Install the air cleaner assembly (refer to Air Cleaner Assembly Installation)
5. Install the engine cover (refer to Engine Cover Installation).