Hydraulic Brakes Components P42
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Brake Pressure Differential Switch | Bolted to the brake pressure modulator valve below the radiator, on the lower crossmember | Antilock Brake System Component Views in Antilock Brake System | Antilock Brake System Connector End Views in Antilock Brake System |
Daytime Running Lamps (DRL) Module | On the IP harness, located by the body builder | -- | Lighting Systems Connector End Views in Lighting Systems |
Diode Network | On the IP harness, located by the body builder | -- | |
Electronic Brake Control Module (EBCM) | Below the radiator, on the lower crossmember | Antilock Brake System Component Views in Antilock Brake System | Antilock Brake System Connector End Views in Antilock Brake System |
Ignition Switch | Lower RH side of the steering column, below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Power Brake Booster Fluid Flow Alarm | Provision installed by the body builder | -- | |
Power Brake Booster Fluid Flow Indicator/Alarm Delay Module | Provision installed by the body builder | -- | |
Power Brake Booster Fluid Flow Indicator/Alarm Switch | Provision for the body builder, behind the LH radiator support | ||
Power Brake Booster Pump Pressure Switch | Provision for the body builder, behind the LH radiator support | -- | |
C111 | Engine harness to the ABS harness, at the front of the LH frame rail, above the steering gearbox | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, in the bulkhead near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C206 | Located by the body builder | -- | -- |
C211 | IP harness to the engine harness, on top of the steering column support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G108 | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | LH interior bulkhead, near the relay bracket | -- | -- |
P102 | On the bulkhead, located by the body builder | Harness Routing Views in Wiring Systems | -- |
R202 | At the connector to the power brake booster fluid flow alarm, located by the body builder | -- | -- |
S143 (EFI Diesel) | In the engine harness, approximately 16 cm (6 in) from the A/C compressor clutch breakout toward C200 | -- | -- |
S143 (MFI Diesel) | In the engine harness, approximately 17 cm (7 in) from P100 | -- | -- |
S165 | In the ABS harness, approximately 10 cm (4 in) from the breakout for C110 | -- | -- |
S167 | In the ABS harness, approximately 15 cm (6 in) from the RH wheel speed sensor breakout, toward C110 | -- | -- |
S204 | In the IP harness, approximately 8 cm (3 in) from the IP fuse block breakout, toward C200 | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout, toward C200 | -- | -- |
S207 | In the IP harness, approximately 40 cm (16 in) from the fuse block breakout, toward the instrument cluster connector | -- | -- |
S257 | In the IP harness, approximately 24 cm (9 in) from the breakout for the IP fuse block, toward C200 | -- | -- |
Hydraulic Brakes Components P32 and Export
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Brake Pressure Differential Switch | Bolted to the brake pressure modulator valve below the radiator, on the lower crossmember | Antilock Brake System Component Views in Antilock Brake System | Antilock Brake System Connector End Views in Antilock Brake System |
Daytime Running Lamps (DRL) Module | On the IP harness, located by the body builder | -- | Lighting Systems Connector End Views in Lighting Systems |
Diode Network | On the IP harness, located by the body builder | -- | |
Electronic Brake Control Module (EBCM) | Below the radiator, on the lower crossmember | Antilock Brake System Component Views in Antilock Brake System | Antilock Brake System Connector End Views in Antilock Brake System |
Ignition Switch | Lower RH side of the steering column, below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Park Brake Actuator Position Switch | In the auto apply park brake component box, at the RH frame rail behind the transmission | Park Brake System Component Views in Park Brake | Park Brake System Connector End Views in Park Brake |
Park Brake Alarm | On the IP harness, located by the body builder | -- | Park Brake System Connector End Views in Park Brake |
Park Brake Alarm Relay | On the IP harness, located by the body builder | -- | Park Brake System Connector End Views in Park Brake |
Park Brake Pull Button Relay | On the IP harness, located by the body builder | -- | Park Brake System Connector End Views in Park Brake |
Park Brake Pull Button Switch | Mounted to the IP | -- | Park Brake System Connector End Views in Park Brake |
Park Brake Switch (w/o Auto Apply) | On the IP harness, located by the body builder | -- | -- |
Power Brake Booster Fluid Flow Alarm | Provision installed by the body builder | -- | |
Power Brake Booster Fluid Flow Indicator/Alarm Delay Module | Provision installed by the body builder | -- | |
Power Brake Booster Fluid Flow Indicator/Alarm Switch | Provision installed by the body builder | -- | |
Power Brake Booster Pump Pressure Switch | Provision installed by the body builder | -- | -- |
C104 | On top of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C111 | Above the front of the LH frame rail, near the brake master cylinder | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | At the top front of the steering column support, near the park brake pull button switch | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C304 | Above the auto apply park brake component box at the RH frame rail, behind the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
D201 | In the IP harness, 14 cm (5 in) from the breakouts for the engine harness connector C200 and the horn relay | -- | -- |
G108 | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | Mounted to the top front of the steering column support plate | -- | -- |
G350 | In the auto apply park brake component box at the RH frame rail, behind the transmission | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
R203 | At the connector to the power brake booster fluid flow alarm, located by the body builder | -- | -- |
S128 (Diesel) | In the engine harness, 12 cm (5 in) from the glowplug controller breakout, toward the waste gate solenoid breakout | -- | -- |
S143 (Diesel) | In the engine harness, 2 cm (1 in) from the breakout for C100 and C207, toward the cooling fan connector | -- | -- |
S143 (Gas) | In the engine harness, 5 cm (2 in) from the breakout for the ABS connectors C110 and C111, toward the P100 | -- | -- |
S150 (Diesel) | In the engine harness, 14 cm (6 in) from P100 | -- | -- |
S150 (Gas) | In the engine harness, 4 cm (2 in) from the breakout for the battery junction block | -- | -- |
S165 | In the ABS harness, approximately 10 cm (4 in) from the breakout for C110 | -- | -- |
S167 | In the ABS harness, approximately 19 cm (7 in) from the breakout for the RH wheel speed sensor, toward C110 | -- | -- |
S169 (Diesel) | In the engine harness, 8 cm (3 in) from the breakout for the engine coolant level switch, toward the starter relay breakout | -- | -- |
S169 (Gas) | In the engine harness, 58 cm (23 in) from passthrough P100 | -- | -- |
S190 (Diesel) | In the engine harness, 15 cm (6 in) from the branch to the engine coolant level and the A/C compressor refrigerant pressure switch, toward the branch to the starter relay and the fuel pump relay | -- | -- |
S202/S203 (Diode Splice) | In the IP harness, approximately 14 cm (5 in) from the breakout for connector C200 and the horn relay | -- | -- |
S204 | In the IP harness, 16 cm (6 in) from the breakout for connector C200, toward the IP fuse block | -- | -- |
S205 | In the IP harness breakout for the instrument cluster connector, 10 cm (4 in) from the main harness | -- | -- |
S207 | In the IP harness, 20 cm (8 in) from the breakout for connector C200, toward the IP fuse block | -- | -- |
S211 | In the IP harness, 6 cm (2 in) from the dimmer switch and the IP cluster breakout, toward the IP fuse block | -- | -- |
S212 | In the IP harness, 10 cm (4 in) from the breakouts for the IP cluster connector and the IP dimmer switch, toward the IP fuse block | -- | -- |
S220 (Diesel) | In the IP side of the engine harness, 4 cm (1 in) from the breakout for the BTSI relay and the fan control relay | -- | -- |
S228 (Diesel) | In the IP side of the engine harness, 28 cm (11 in) from P100 | -- | -- |
S230 (Gas) | In the IP side of the engine harness, 7 cm (2 in) from the breakout for the hazard lamp flasher and windshield wiper switch, toward P100 | -- | -- |
S364 | In the auto apply park brake harness, 4 cm (1 in) from the breakouts for the park brake pump motor and the park brake pump relay connectors | -- | -- |
