Illustration | Tool Number/ Description |
|---|---|
| J 5403 Snap Ring Pliers |
| J 6083 Snap Ring Pliers |
| J 8433-1 Puller Bar |
| J 8433-3 Forcing Screw |
| J 9398-A Bearing Remover |
| J 9481-A Bearing Installer |
| J 9553-01 O-Ring Remover |
| J 9625-A Leak Test Adapter |
| J 21213-A Four Jack Dual Range Temperature Tester |
| J 21352-A Support Block |
| J 23128-A Seal Seat Remover and Installer |
| J 29886 Driver Handle |
| J 33011 O-Ring Installer |
| J 33013 Hub and Drive Plate Remover and Installer |
| J 33017 Pulley and Bearing Assembly Installer |
| J 33019 Bearing Staking Tool |
| J 33023-A Puller Pilot |
| J 33024 Clutch Coil Installer Adapter |
| J 33025 Clutch Coil Puller Legs |
| J 33027-A Clutch Hub Holding Tool |
| J 34614 Shaft Seal Protector |
| J 34992 Compressor Holding Fixture |
| J 36645 Evaporator Cleaning Gun |
| J 39037 High-Side Charge Valve Socket |
| J 39400 Leak Detector |
| J 39500 R-134a A/C Refrigerant Recovery, Recycling and Recharging System (ACR4) |
| J 39500-50 Refillable Recovery Tank |
| J 39893 Pressure Testing Connector |
| J 41447 R-134a Florescent Dye |
| J 41552 Pulley Puller |
| J 41459 Dye Injector |
| J 41790 Compressor Holding Fixture |
| J 41810-100A Active Flow Control (AFC) |
| J 42136 Compressor Lip Seal Remover |
