The P32/42 chassis may be equipped with an optional factory
air conditioning system. This system is an expansion valve type of system.
Most of the air conditioning components on the P32/42 vehicles are common
between the 2 vehicles. However, the manufacturer of the body installs
some of the components. The 1998 P32/42 service manual only
provides information on those components that were installed on the vehicle
at the General Motors Detroit Assembly Plant. For service information covering
components installed by the body manufacturer, contact the manufacturer
of the body. The following components are installed by the body manufacturer:
• | The air conditioning (A/C) evaporator |
• | The A/C expansion valve |
• | The air distributor duct |
• | The blower motor resistor |
• | The control assembly and blower switch |
• | The recirculating/fresh air actuator |
• | The temperature control actuator |