Lighting Systems Components P32
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Backup Lamps (provision for) | At the rear lamps harness (body builder installed) | -- | -- |
Battery Junction Block | On the forward left side of the bulkhead, above P100 | Power and Grounding Component Views in Wiring Systems | -- |
Daytime Running Lamps (DRL) Module | Attached to the IP harness, located by the body builder | -- | |
Daytime Running Lamps (DRL) Relay | Mounted on top of the steering column support, at the driver's island | ||
Daytime Running Lamps (DRL) Relay 2 | On the forward lamps harness, located by the body builder | -- | |
Hazard Lamps Flasher | At the inner left side of the steering column support bracket | ||
Headlamps/Panel Dimmer Switch | On the IP harness, located by the body builder | -- | |
Headlamps | In the forward lamps harness (body builder installed) | -- | -- |
Headlamps Dimmer Switch | At the left side of the steering column, above the support bracket | ||
Headlamps Switch | On the IP harness, located by the body builder | -- | |
Ignition Switch | On the lower right side of the steering column, below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
IP Lamps Dimmer Switch | On the IP harness, located by the body builder | -- | |
License Lamps (provision for) | Body builder installed | -- | -- |
Park and Turn Signal Lamps | In the forward lamps harness (body builder installed) | -- | -- |
Park Brake Switch (w/o Auto Apply) | Body builder installed | -- | -- |
Park/Neutral Position and Backup Lamps Switch | On the left side of the transmission, near the middle | ||
Seat Belt and Lamps Alarm Module | Attached to the IP fuse block | -- | Audible Warnings Connector End Views in Instrument Panel, Gauges and Console |
Sidemarker Lamps (provision for) | In the forward lamps harness (body builder installed) | -- | -- |
Stoplamps Switch | Above the brake pedal, at the right side of the steering column | ||
Tail and Stop/Turn Signal Lamps (provision for) | Body builder installed | -- | -- |
Transmission Range (TR) Lamp | In the transmission range selector, on the steering column | -- | |
Turn Signal Switch | Part of the multifunction lever, on the steering column | ||
C100 | Engine harness to the forward lamps harness, at the left side of the engine bulkhead, near the battery junction block | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, in the bulkhead, near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | Engine harness to the body builder provision harness, on top of the steering column support, at the left side | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C204 | Marker lamps provision for the body builder | -- | -- |
C207 | Engine harness to the windshield wiper harness, at the left side of the engine bulkhead, near the battery junction block | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C210 | Dome lamp provision for the body builder | -- | Inline Harness Connector End Views in Wiring Systems |
C212 | Park accessory provision for the body builder | -- | -- |
C213 | Fog lamps provision for the body builder | -- | -- |
C300 | Engine harness to rear chassis harness, near the middle of the chassis, at the outside of the left frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C400 | Rear chassis harness to taillamp harness, behind the fuel tank, near the left frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C402 | Center high mounted stoplamp (CHMSL) provision for the body builder | -- | -- |
C404 | Mid-vehicle clearance lights provision for the body builder | -- | -- |
G101 | Body builder installed | -- | -- |
G102 | Body builder installed | -- | -- |
G103 (Gas) | At the rear of the right cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G107 | Body builder installed | -- | -- |
G108 | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | Mounted to the top front of the steering column support plate | -- | -- |
G401 | Body builder installed | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
R101 | In the engine harness, 7 cm (3 in) from the breakout for the engine coolant fan motor connector toward the A/C compressor relay | -- | -- |
S105 | In the engine harness, 4 cm (2 in) from the breakout for the heated oxygen sensors, toward the ignition control module breakout | -- | -- |
S106/S107 (Resistor Splice) | Resistor splice for R101 in the engine harness, 7 cm (3 in) from the breakout for the engine coolant fan motor connector, toward the A/C compressor relay | -- | -- |
S117 | In the engine harness, 7 cm (3 in) from the breakout for C100 and C207, toward the engine coolant fan motor | -- | -- |
S124 (Gas) | In the engine harness, 11 cm (4 in) from the breakout for the cruise control module, toward the starter relay | -- | -- |
S126 (Gas) | In the engine harness, 18 cm (7 in) from the breakout for the A/C compressor clutch and the EGR valve, toward the VCM | -- | -- |
S166 (Gas) | In the engine harness, 5 cm (2 in) from the breakout for the cruise control module, toward the VCM | -- | -- |
S166 (Diesel) | In the engine harness, 2 cm (1 in) from the breakout for C100 and C207, toward the auxiliary engine coolant fan motor | -- | -- |
S169 (Gas) | In the engine harness, 38 cm (15 in) from the breakout for C100 and C207, going away from passthrough P100 | -- | -- |
S169 (Diesel) | In the engine harness, 8 cm (4 in) from the breakout to the engine coolant level switch and the auxiliary engine coolant fan motor connector | -- | -- |
S171 | In the forward lamps harness, 12 cm (5 in) to the breakout for the left headlamp | -- | -- |
S172 | In the forward lamps harness, 5 cm (2 in) to the breakout for the left headlamp | -- | -- |
S173 | In the forward lamps harness, 9 cm (4 in) to the breakout for the left headlamp, toward the DRL relay | -- | -- |
S174 | In the forward lamps harness, 18 cm (7 in) to the breakout for the right headlamp, toward the DRL relay | -- | -- |
S175 | In the forward lamps harness, 9 cm (4 in) to the breakout for the right headlamp, toward the DRL relay | -- | -- |
S176 | In the forward lamps harness, 5 cm (2 in) to the breakout for the right headlamp, toward the DRL relay | -- | -- |
S201 | In the IP harness, 10 cm (4 in) from C200 toward the IP fuse block | -- | -- |
S204 | In the IP harness, 26 cm (10 in) from the horn relay breakout, toward P100 | -- | -- |
S206 | In the IP harness, 25 cm (10 in) from the instrument cluster connector | -- | -- |
S207 | In the IP harness, 20 cm (8 in) from the engine harness connector C200 and 4 relay sockets | -- | -- |
S211 | In the IP harness, 6 cm (2 in) from the dimmer switch and the IP cluster connector breakout, toward the IP fuse block | -- | -- |
S212 | In the IP harness, 10 cm (4 in) from the breakout for the instrument cluster connector, toward the IP fuse block | -- | -- |
S213 | In the IP harness, 15 cm (6 in) from the harness in the breakout for the headlamp switch connector | -- | -- |
S214 | In the IP harness, 18 cm (7 in) from the breakout for the IP lamp dimmer switch and the instrument cluster connector, toward the IP fuse block | -- | -- |
S215 | In the IP harness, 35 cm (14 in) from the IP fuse block | -- | -- |
S231 | In the IP side of the engine harness, 7 cm (4 in) from the turn signal switch connector breakout | -- | -- |
S401 | In the rear lamp harness, 45 cm (17 in) from C400 | -- | -- |
S402 | In the rear lamp harness, 55 cm (22 in) from C400 | -- | -- |
S403 | In the rear lamp harness, 65 cm (26 in) from C400 | -- | -- |
S404 | In the rear lamp harness, 5 cm (2 in) from the breakout for the left taillamp | -- | -- |
S405 | In the rear lamp harness, 5 cm (2 in) from the breakout for the right taillamp | -- | -- |
Lighting Systems Components P42
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Backup Lamps (provision for) | At the rear lamps harness (body builder installed) | -- | |
Backup Lamps Switch (Manual Trans) | On the upper left side of the transmission, near the middle | ||
Battery Junction Block | On the forward left side of the bulkhead, above P100 | Power and Grounding Component Views in Wiring Systems | -- |
Daytime Running Lamps (DRL) Relay | Left interior bulkhead, on the relay bracket | ||
Daytime Running Lamps (DRL) Module | On the IP harness, located by the body builder | -- | |
Hazard Lamps Flasher | On the IP harness, located by the body builder | ||
Headlamps | In the forward lamps harness (body builder installed) | -- | |
Headlamps Dimmer Switch | At the left side of the steering column, above the support bracket | ||
Headlamps Switch | On the IP harness, located by the body builder | -- | |
Ignition Switch | On the lower right side of the steering column, below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
IP Lamps Dimmer Switch | On the IP harness, located by the body builder | -- | |
License Lamps (provision for) | Body builder installed | -- | |
Park and Turn Signal Lamps | In the forward lamps harness (body builder installed) | -- | |
Park Brake Indicator Switch | Body builder installed | -- | Park Brake System Connector End Views in Park Brake |
Park/Neutral Position and Backup Lamps Switch | On the left side of the transmission, near the middle | ||
Powertrain Control Module (EFI Diesel) | At the left side of the drivers island, on the relay bracket | Engine Controls Component Views in Engine Controls | Powertrain Control Module Connector End Views in Engine Controls |
Seat Belts Alarm Module | Attached to the IP fuse block | -- | Audible Warnings Connector End Views in Instrument Panel, Gauges and Console |
Sidemarker Lamps (provision for) | In the forward lamps harness (body builder installed) | -- | |
Tail and Stop/Turn Signal Lamps (provision for) | Body builder installed | -- | |
Torque Converter Clutch (TCC) and Stoplamps Switch | Above the brake pedal, at the right side of the steering column | ||
Transmission Range (TR) Lamp | In the transmission range selector, on the steering column | -- | |
Turn Signal Switch | Part of the multifunction lever, on the steering column | ||
C200 | Engine harness to the IP harness, in the bulkhead, near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 | Engine harness to the IP harness, in the bulkhead, near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 | Engine harness to the IP harness, in the bulkhead, near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C205 | On the IP harness located by the body builder | -- | -- |
C207 | IP harness to the windshield wiper/washer pump motor harness, on the IP harness located by the body builder | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C211 | IP harness to the engine harness, above the steering column upper support | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C300 | Engine harness to the rear chassis harness, near the middle of the chassis at the outside of the left frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C400 | Rear chassis harness to the taillamp harness, behind the fuel tank near the left frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C402 | At the rear of the rear lamps harness, approximately 15 cm (6 in) from the conduit end labeled CHMSL | Harness Routing Views in Wiring Systems | -- |
G108 (Manual Trans) | At the right front of the engine near the generator bracket | Power and Grounding Component Views in Wiring Systems | -- |
G108 (Auto Trans) | At the rear of the left cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G200 | Left interior bulkhead near the relay bracket | -- | -- |
G401 | Body builder installed | Power and Grounding Component Views in Wiring Systems | -- |
S101 | In the forward lamps harness, approximately 25 cm (10 in) from C203 | -- | -- |
S103 | In the forward lamps harness, approximately 110 cm (41 in) from the left lamps breakout toward the right lamps breakout | -- | -- |
S104 | In the forward lamps harness, approximately 17 cm (7 in) from the right lamps breakout toward the left lamps | -- | -- |
S105 | In the forward lamps harness, approximately 122 cm (44 in) from the right lamps breakout toward the left lamps | -- | -- |
S131 | In the engine harness, at the battery junction block fusible link C3 | -- | -- |
S143 (MFI Diesel) | In the engine harness, approximately 17 cm (7 in) from P100 | -- | -- |
S143 (EFI Diesel) | In the engine harness, approximately 16 cm (6 in) from the A/C compressor clutch breakout, toward C200 | -- | -- |
S143 (Gasoline) | In the engine harness, approximately 6 cm (2 in) from the C200 breakout, toward the MAF sensor | -- | -- |
S201 (EFI Diesel) | In the IP side of the engine harness, approximately 16 cm (6 in) from the stoplamp switch, toward P100 | -- | -- |
S204 | In the IP harness, approximately 20 cm (8 in) from the fuse block breakout, towards C200 | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout, toward C200 | -- | -- |
S206 | In the IP harness, approximately 12 cm (5 in) before the fuse block breakout, toward C200 | -- | -- |
S207 | In the IP harness, approximately 40 cm (16 in) before the fuse block breakout, toward the instrument cluster connector | -- | -- |
S208 | In the IP harness headlamps switch breakout approximately 8 cm (3 in) before the fuse block breakout, toward C200 | -- | -- |
S209 | In the IP harness, approximately 50 cm (20 in) before the fuse block breakout, toward the instrument cluster | -- | -- |
S218 | In the IP harness, approximately 28 cm (11 in) before the fuse block breakout, toward C200 | -- | -- |
S220 | In the IP harness, approximately 16 cm (6 in) before the fuse block breakout, toward C200 | -- | -- |
S257 | In the IP harness, approximately 24 cm (10 in) from the fuse block breakout, toward C200 | -- | -- |
S401 (125 in, 133 in wheelbase; 110 in, 157 in with school bus) | In the rear lamps harness, approximately 45 cm (17 in) from C400 | -- | -- |
S401 (157 in wheelbase w/o school bus; 178 in with school bus) | In the rear lamps harness, approximately 100 cm (39 in) from C400 | -- | -- |
S402 (125 in, 133 in wheelbase; 110 in, 157 in w/o school bus) | In the rear lamps harness, approximately 55 cm (22 in) from C400 | -- | -- |
S402 (157 in wheelbase with school bus, 178 in w/o school bus | In the rear lamps harness, approximately 110 cm (43 in) from C400 | -- | -- |
S403 (125 in, 133 in wheelbase; 110 in, 157 in w/o school bus) | In the rear lamps harness, approximately 65 cm (26 in) from C400 | -- | -- |
S403 (157 in wheelbase with school bus, 178 in w/o school bus | In the rear lamps harness, approximately 120 cm (47 in) from C400 | -- | -- |
S404 | In the rear lamps harness, approximately 5 cm (2 in) from right taillamps breakout | -- | -- |
S405 | In the rear lamps harness, approximately 5 cm (2 in) from the left taillamps breakout | -- | -- |
