Audible Warnings Components P42
Name | Location | Locator View | Connector End View |
|---|---|---|---|
IP Fuse Block | Located near the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Seat Belts Alarm Module | Attached to the IP fuse block | -- | |
G200 | Left interior bulkhead, near the relay bracket | -- | -- |
S204 | In the IP harness, approximately 20 cm (8 in) from the fuse block breakout, towards C200 | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout, toward C200 | -- | -- |
S207 | In the IP harness, approximately 40 cm (16 in) before the fuse block breakout, toward the instrument cluster connector | -- | -- |
S209 | In the IP harness, approximately 50 cm (20 in) before the fuse block breakout, toward the instrument cluster | -- | -- |
Audible Warnings Components P32
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Instrument Cluster | Body builder installed | -- | |
IP Fuse Block | Located near the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Seat Belt and Lamps Alarm Module | Attached to the IP fuse block | -- | |
C200 | Engine harness to the IP harness, at the top front of the steering column support, near the park brake pull button switch | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G108 | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | Mounted to the top front of the steering column support plate | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
S166 (Diesel) | In the engine harness, 2 cm (1 in) from the breakout for C100 and C207, toward the auxiliary engine coolant fan motor | -- | -- |
S166 (Gas) | In the engine harness, 5 cm (2 in) from the breakout for the cruise control module, toward the VCM | -- | -- |
S201 | In the IP harness, 10 cm (4 in) from C200, toward the IP fuse block | -- | -- |
S204 | In the IP harness, 26 cm (10 in) from the horn relay breakout, toward P100 | -- | -- |
S206 | In the IP harness, 25 cm (10 in) from the instrument cluster connector | -- | -- |
S211 | In the IP harness, 6 cm (2 in) from the dimmer switch and the IP cluster connector breakout, toward the IP fuse block | -- | -- |
S214 | In the IP harness, 18 cm (7 in) from the breakout for the IP lamps dimmer switch and the instrument cluster connector, toward the IP fuse block | -- | -- |
