1. Turn the ignition switch to the RUN position.
2. Use a test light in order to backprobe the instrument connector cluster from cavity 31 to B+.

Refer to Using Connector Test Adapters in Wiring Systems.

Did the test light illuminate?

--

Go to Step 3

Go to Step 2

Repair the open in CKT 451 (BLK/WHT) between the instrument cluster connector and G108.

Did you complete the repair?

--

System OK

--

1. Backprobe the instrument cluster with a J 39200 DMM from cavity 22 to ground.
2. Measure the voltage.

Did the voltage measure less than the specified value?

10 V

Go to Step 4

Go to Step 5

Repair the open in CKT 439 (PNK) between the IP fuse block and the instrument cluster connector.

Did you complete the repair?

--

System OK

--

Replace the instrument cluster.

Did you complete the repair?

--

System OK

--