Step | Action | Value | Yes | No |
|---|---|---|---|---|
1 | Check the main power switch. Is the switch on? | -- | ||
2 |
Is there power? | -- | System OK | |
3 | Check the power plug. Is the power cord plugged in? | -- | ||
4 | Plug in the power cord. Is the repair complete? | -- | System OK | -- |
5 | Check the circuit for power. Is there power? | -- | ||
6 | Check the digital display. Does the display read Full? | -- | ||
7 | Restore power to the circuit. Does the circuit have power? | -- | System OK | -- |
8 | Change the tank according to the manufacturer's instructions. Is the replacement complete? | -- | System OK | -- |
9 | Check the digital display. Does the display read Hi-P? | -- | ||
10 | Check the valves on the unit tank. Are the valves open? | -- | System OK | -- |
11 | Check the components. Are the components faulty? | -- | ||
12 | Operate recycling only to activate automatic air purge. Excessive air raises the tank pressure. Refer to manufacturer's instructions. Is the automatic air purge operating? | -- | System OK | -- |
13 | Call a Tech Assist. 1-800-345-2233. Did you call Tech Assist.? | -- | System OK | -- |
