Rear Brake Hose Replacement Left Side

CAUTION: Always use double-walled steel brake pipe. . .[EDIT: check S/T Truck sio-id=448]

1. Disconnect the hose from the tee connector.
2. Disconnect the other end of the hose from the brake caliper.
3. Remove the hose.

Do not twist the hose or allow it to contact any suspension components after installation.

1. Connect the hose to the brake caliper.

Tighten
Tighten the hose fitting to 23 N·m (17 lb ft).

2. Connect the other end of the hose to the tee fitting.

Tighten
Tighten the hose fitting to 23 N·m (17 lb ft).

3. Bleed the brakes. Refer to Bleeding the Brake Hydraulic System.

Rear Brake Hose Replacement Right Side

CAUTION: Always use double-walled steel brake pipe. . .[EDIT: Check S/T Truck sio-id=448.]

1. Disconnect the steel pipe at the bracket.
2. Remove the retainer.
3. Disconnect the hose.

Do not twist the hose or allow it to contact any suspension components after installation.

1. Connect the hose to the brake caliper.

Tighten
Tighten the hose fitting to 23 N·m (17 ft lb).

2. Install the retainer.
3. Connect the steel pipe at the bracket.

Tighten
Tighten the pipe fitting to 23 N·m (17 lb ft).

4. Bleed the brakes. Refer to Bleeding the Brake Hydraulic System.

Rear Brake Hose Replacement Pipe to Tee

CAUTION: Always use double-walled steel brake pipe. . .[EDIT: Check S/T Truck sio-id=448.]

1. Disconnect the steel pipe at the bracket.
2. Remove the retainer.
3. Disconnect the hose.

Do not twist the hose or allow it to contact any suspension components after installation.

1. Connect the hose to the tee fitting.

Tighten
Tighten the hose fitting to 23 N·m (17 lb ft).

2. Install the retainer.
3. Connect the steel pipe at the bracket.

Tighten
Tighten the pipe fitting to 23 N·m (17 lb ft).

4. Bleed the brakes. Refer to Bleeding the Brake Hydraulic System.