For 1990-2009 cars only
Adjustment Procedure
- Block the vehicle's wheels.
- Turn the ignition ON and move the column shift lever to N (Neutral).
- Remove the cotter pin and the clevis pin.
- Slide the clevis from the cam lever.
- Move the cam lever slightly upward in order to take up the slack between the cam and the brake shoe web.
- Adjust the clevis in or out in order to align it with the hole in the cam lever.
- Install the clevis, the clevis pin and the cotter pin.
- Remove the wheel blocks.
- Check the operation by applying the parking brake. Note the brake's holding ability.
- Release the parking brake and check that the linings are completely free of the drum.
- Repeat the procedure if necessary
Important: This parking brake assembly does not have a brake shoe adjusting screw. Adjustment is done at the cam lever clevis.
