STEERING COLUMN RUBS I/P (INSTALL STG. COLUMN SUPPORT)

SUBJECT: STEERING COLUMN ABRADES SIDE OF INSTRUMENT PANEL (INSTALL STEERING COLUMN SUPPORT BRACE)

VEHICLES AFFECTED: 1991 P3 W/UNION CITY BODY (E32 OR E33)

owners of some 1991 P3 vehicles with Union City bodies (E32 or E33) may experience a condition where the steering column abrades the instrument panel.

To correct this condition an additional steering column support brace can be installed using the following procedure.

SERVICE PROCEDURE

1. Remove and retain the five (5) fasteners which mount the I/P bezel and cluster assembly to the dash panel.

2. Gently pull the I/P bezel and cluster assembly away from the dash and set it on top of the dash. Take care not to scratch the lens.

Important: The electrical ponytail harness does not have to be removed.

3. Remove and retain the fastener from the left upper corner of the steering column support bracket as shown in Figure 1.

4. Remove the cowl nut and bolt identified in Figure 2 (assistance may be required).

5. Install the steering column support brace with the elongated opening aligned with the bolt hole in the cowl and the other hole aligned with the steering column support bracket bolt hole (Figures, 1 and 3).

6. Start the steering column support bracket bolt and hand tighten.

7. Install the cowl nut and bolt and torque to 15-20 N.m. (11-15 ft.lbs. )(assistance may be required).

8. Torque the steering column support bracket bolt to 20-30 N.m. (15-22 ft.lbs.).

9. Install the I/P bezel and the cluster assembly using the original five (5) fasteners.

SERVICE PARTS INFORMATION

Part Number Description Qty. ------------ ---------------------------- ---- 15680303 Steering Column Support Brace 1

WARRANTY INFORMATION

For vehicles repaired under warranty use: Labour Time 0.3 hours.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.