3RD GEAR HOP-OUT (2ND GEAR ON THE GEAR SHIFT KNOB) 1985-88 HM 117 MANUAL TRANSMISSION (RPO M20) 1985-88 CH/SM 465 MANUAL TRANSMISSION (RPO MC8)
ALL MODELS
Some 1985-1988 R/V, C/K AND P Trucks equipped with a HM-117 (CH/SM 465 in 1985-88 Medium Duty Trucks) 4-speed manual transmission may exhibit 3rd gear hop-out on acceleration or deceleration.
If 3rd gear hop-out occurs, it can be repaired by installing the service part package listed below.
P/N 8672944 Service Part Package contents:
Quantity Part Description -------- ---------------- 1 3rd Speed Gear 1 3rd-4th Synchronizer Hub 1 3rd-4th Speed Synchronizer Sleeve 2 3rd and 4th Speed Blocker Rings 3 Synchronizer Keys 2 Synchronizer Springs
Refill the transmission with only SAE 80W-90 gear lubricant. Do not use automatic transmission fluid or engine oil. This will cause foaming out the vent and durability concerns.
Refer to the Unit-Repair Section of the appropriate Service Manual for the procedures.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.